How to Remove Hard Water Stains
Spots and stains, no matter where they land, are unsightly and ugly, and you work hard to remove them.
A spot is easy to remove, as it is a deposit of substance that sits on top of a surface. Examples include chocolate, milk, or ketchup. A stain is a different challenge altogether, as it means the substance has penetrated or is strongly attached to a surface. Examples include mustard, curry, or Kool-Aid.
Hard water stains are common occurrences, yet often challenging to remove. And if you don’t get to them quickly, they can become even tougher to tackle.
What are they?
Hard water stains, often called lime deposits, are basically limestone, calcium and magnesium, among other mineral substances. They all come from ground content. The more minerals in the ground, the harder the water.
Certain areas of the country have more mineral content than others, and without a water softening system in a home or business, the result is a buildup of hard water stains anywhere water stands and dries, such as around sinks, underneath water fountains, and on bathroom floors.
They can also be a problem in toilets and other receptacles that hold water. Mineral deposits can also affect appliances, such as coffee pots.
If you have ever washed dishes, your car, or other shiny surfaces, and the water is hard, you can easily see the issue. White “scales” of minerals are a problem.
How to remove them
Obviously, the best way is prevention. Wiping up water from surfaces before it dries keeps water stains at bay.
But when they do occur, you need to consider which type of cleaning product will react with the mineral stains.
The most common mineral stain cleaning product is white vinegar, which is acidic. Since mineral stains are alkaline, like rust, an acid-based cleaning product is required. White vinegar is safe, easy-to-use, and effective for most mineral deposit issues. Use it as you would any cleaning product. Apply, allow a minute or two of contact time, and wipe away.
But if the mineral deposit is heavy, and white vinegar doesn’t do the trick, then a formulated product from your department or hardware store is your next choice. These are stronger acid products and you must follow directions when using them. Applying them to certain surfaces can damage those surfaces so be sure to read the fine print.
Always wear protective gloves and glasses, as skin and eye contact with any cleaning product can be hazardous.
And, as you know, when you have cleaning questions or need professional cleaning services in your home, do the smart thing. Call your favorite cleaning company. After all, it pays to call a pro!
Best Reason to Clean Your Carpet.
Clean Car Catharsis.
There are so many things to clean up after a long, messy winter, and bringing your vehicle back to life is probably at the top of the list.
Running it through a car wash occasionally helps keep the grime from building up on the exterior of your vehicle, but you want to give some attention to the entire car, inside and out. A clean car makes you feel really good. Until you encounter the next mud puddle, of course.
So as you stand there looking at your really dirty car, the question that might be on your mind is, “Where do I start?”
It makes sense to washing the exterior completely, using a sudsing detergent and water. Mix up your solution in a bucket, using warm or hot water if possible, and apply the sudsy mix to the exterior and allow it a few minutes to soak. Then scrub with a soft sponge or cloth, and rinse. If your water is hard, you will need to hand dry after washing.
The toughest part of cleaning the exterior of often the front of the vehicle, such as the bumper. Bugs, road tar, and other debris can build up and be really challenging to remove. Use your cloth vigorously, along with some dry solvent solution for the tar, but be very careful not to rub too hard or use too strong a solvent as that can damage paint. When the car is clean, consider a wax treatment, following manufacturer directions.
The tires will need some special attention. A dishwashing sponge with a handle is a good tool to use to get in the tight areas in wheel hubcaps and other sections of the tire. Following cleaning, you can use a tire shine product to really make your car look sharp.
This is where cleaning gets rough. All those details in the car need cleaned. That’s why they call it “automobile detailing” after all.
Start off with a thorough vacuuming of everything. The seats, carpet, nooks and crannies, under seats, between seats. You get the picture. A lot of stuff will be in there, and a vacuum with a crevice tool is the best way to reach debris.
Lay out your car mats and vacuuming them with an upright vacuum, as that will break free and remove more dust.
Mix up a sudsing detergent solution in a bucket, and using soft cloths, begin to clean all hard surfaces. You will need dry cloths as well, as you work through the vehicle. Some cotton swabs will work for reaching in smaller areas, such as air vents.
After all that is done, it’s time to do the windows. Use lint-free cloths and window cleaner, and inspect with a flashlight to see if there are any streaks remaining.
There’s more you can do, obviously, such as shampooing the fabric and cleaning any leather you may have. But these basic steps will get you started on your pathway to clean car catharsis.
And remember, your favorite cleaning company knows all about how to clean any surface, including your car. Call them today. After all, if pays to call a pro!