Clean Car Catharsis. 3 days Dry of Lake Worth, FL.
There are so many things to clean up after a long, messy winter, and bringing your vehicle back to life is probably at the top of the list.
Running it through a car wash occasionally helps keep the grime from building up on the exterior of your vehicle, but you want to give some attention to the entire car, inside and out. A clean car makes you feel really good. Until you encounter the next mud puddle, of course.
So as you stand there looking at your really dirty car, the question that might be on your mind is, “Where do I start?”
It makes sense to washing the exterior completely, using a sudsing detergent and water. Mix up your solution in a bucket, using warm or hot water if possible, and apply the sudsy mix to the exterior and allow it a few minutes to soak. Then scrub with a soft sponge or cloth, and rinse. If your water is hard, you will need to hand dry after washing.
The toughest part of cleaning the exterior of often the front of the vehicle, such as the bumper. Bugs, road tar, and other debris can build up and be really challenging to remove. Use your cloth vigorously, along with some dry solvent solution for the tar, but be very careful not to rub too hard or use too strong a solvent as that can damage paint. When the car is clean, consider a wax treatment, following manufacturer directions.
The tires will need some special attention. A dishwashing sponge with a handle is a good tool to use to get in the tight areas in wheel hubcaps and other sections of the tire. Following cleaning, you can use a tire shine product to really make your car look sharp.
This is where cleaning gets rough. All those details in the car need cleaned. That’s why they call it “automobile detailing” after all.
Start off with a thorough vacuuming of everything. The seats, carpet, nooks and crannies, under seats, between seats. You get the picture. A lot of stuff will be in there, and a vacuum with a crevice tool is the best way to reach debris.
Lay out your car mats and vacuuming them with an upright vacuum, as that will break free and remove more dust.
Mix up a sudsing detergent solution in a bucket, and using soft cloths, begin to clean all hard surfaces. You will need dry cloths as well, as you work through the vehicle. Some cotton swabs will work for reaching in smaller areas, such as air vents.
After all that is done, it’s time to do the windows. Use lint-free cloths and window cleaner, and inspect with a flashlight to see if there are any streaks remaining.
There’s more you can do, obviously, such as shampooing the fabric and cleaning any leather you may have. But these basic steps will get you started on your pathway to clean car catharsis.
And remember, your favorite cleaning company knows all about how to clean any surface, including your car. Call them today. After all, if pays to call a pro!
How to Remove Hard Water Stains. 3 days Dry of Lake Worth, FL.
Spots and stains, no matter where they land, are unsightly and ugly, and you work hard to remove them.
A spot is easy to remove, as it is a deposit of substance that sits on top of a surface. Examples include chocolate, milk, or ketchup. A stain is a different challenge altogether, as it means the substance has penetrated or is strongly attached to a surface. Examples include mustard, curry, or Kool-Aid.
Hard water stains are common occurrences, yet often challenging to remove. And if you don’t get to them quickly, they can become even tougher to tackle.
What are they?
Hard water stains, often called lime deposits, are basically limestone, calcium and magnesium, among other mineral substances. They all come from ground content. The more minerals in the ground, the harder the water.
Certain areas of the country have more mineral content than others, and without a water softening system in a home or business, the result is a buildup of hard water stains anywhere water stands and dries, such as around sinks, underneath water fountains, and on bathroom floors.
They can also be a problem in toilets and other receptacles that hold water. Mineral deposits can also affect appliances, such as coffee pots.
If you have ever washed dishes, your car, or other shiny surfaces, and the water is hard, you can easily see the issue. White “scales” of minerals are a problem.
How to remove them
Obviously, the best way is prevention. Wiping up water from surfaces before it dries keeps water stains at bay.
But when they do occur, you need to consider which type of cleaning product will react with the mineral stains.
The most common mineral stain cleaning product is white vinegar, which is acidic. Since mineral stains are alkaline, like rust, an acid-based cleaning product is required. White vinegar is safe, easy-to-use, and effective for most mineral deposit issues. Use it as you would any cleaning product. Apply, allow a minute or two of contact time, and wipe away.
But if the mineral deposit is heavy, and white vinegar doesn’t do the trick, then a formulated product from your department or hardware store is your next choice. These are stronger acid products and you must follow directions when using them. Applying them to certain surfaces can damage those surfaces so be sure to read the fine print.
Always wear protective gloves and glasses, as skin and eye contact with any cleaning product can be hazardous.
And, as you know, when you have cleaning questions or need professional cleaning services in your home, do the smart thing. Call your favorite cleaning company. After all, it pays to call a pro!
Is Your Microwave… a Crud Collector? 3 days Dry of Lake Worth, FL.
It’s fast. It’s easy. It’s super convenient. Without it, some of us couldn’t survive in the kitchen. No way.
Yes, the microwave oven is an indispensable appliance.
The microwave oven is a modern invention. The first microwaves were around in the mid 1940s, but were mainly for restaurants and reheating food on airplanes. They were massive devices that had to be cooled continuously by water flow. By the 1950s they were introduced to homeowners and some did indeed purchase them, but they were approximately $12,000 in today’s dollars. The popularity along with more affordability began in the 1980s and microwaves as a common fixture in the kitchen is now here.
Virtually everyone has one. If you don’t, you are in the minority. What all microwave users have in common is cleaning up the mess that inherently comes with using these handy ovens that can cook snacks or complete meals in seconds or minutes instead of hours.
To ensure your microwave oven not only looks good but also operates efficiently, you must keep it clean.
As with any cleaning task, scraping up as much as you can before applying cleaning agents is smart. Food particles and residue that resulted from an “explosion” of food can easily be scraped away from the walls and ceiling of the inside of the oven.
When you have scraped up as much as possible, use an appropriate cleaning solution and liberally spray the interior of the microwave. Give it some time for the solution to work, perhaps five minutes, and then wipe away the grime. But if there is a lot of grime, continue reading and do this…
Fill a microwave-safe bowl about two-thirds full of water. Put it inside the microwave and heat it up on high for about three to five minutes, or until it is boiling. Don’t open the door! Let the bowl sit in there for approximately 10 minutes, allowing the steam to loosen up the grime. Then…
Spray the moist interior of the oven with more cleaning solution, and use paper towels to wipe all interior surfaces. Even the toughest grime should come off after all your prep work.
Other dirty surfaces
Microwave ovens aren’t the only grimy things that can be part of the modern household. When you need any of your surfaces cleaned, such as carpet, furniture, hard floors and more, call your favorite cleaning company. It pays to call a pro!
Hazardous Waste. 3 days Dry of Lake Worth, FL.
Where’s is that trash can?
You know where it is. It’s in the kitchen, the bathroom, the garage. Trash cans (or garbage bins) are everywhere because in our normal routine during the day we generate waste. A lot of waste.
Most items we toss into the trash can are supposed to go there. Normal debris, paper items, leftover foods, among others. You know what we mean. Items like that paper filter full of coffee grounds that you just tossed a few minutes ago.
However, there are some items that shouldn’t automatically go into the trash can. Things that can contribute to the global issue of “hazardous waste.” No, not the nuclear or radioactive type. The hazardous waste that we all generate and should dispose of properly.
Common items that fall into this category are found throughout your home… in basements, under kitchen sinks, in the garage, in closets, and other places. These items can include cleaning products, paints, varnishes, automotive fluids, pesticides, batteries… even electronic items such as old computers that haven’t worked for years. A quick internet search shows a huge list of potential items you might toss in the trash can but should give second thought to doing so.
Some leftover household products that can be considered hazardous waste contain corrosive, toxic, flammable or other reactive elements. You might have, in the past, just thrown them away, to get rid of them. That’s human nature. You figure the disposal company knows what to do. You are right. But they don’t know what’s in the bags you set out. This means you can help by being a smart consumer.
Before throwing away items that could be potentially hazardous, think about how you can determine the best way of disposal. One way is to review labels on items you are throwing away. They should indicate the type of danger they pose and might even have disposal instructions. If the item recommends you wear gloves or eye protection, that’s a clue it could be hazardous waste. Another option is to ask your waste disposal or recycling company for instructions or perhaps contact information for appropriate local government agencies that can provide you with detailed information not only on what is common hazardous waste, but also on local disposal options, including locations you can use to take hazardous waste materials.
One thing you can be sure of. Your favorite cleaning company uses only safe, effective cleaning products when in your home. After all, it pays to call a pro!
The Chewing Gum Dilemma. 3 days Dry of Lake Worth, FL.
We’ve all had this happen.
Walking along and enjoying the day and we notice a bit of stickiness underfoot.
We stop, awkwardly lift the affected foot and inspect the bottom of our shoe. Yep, there it is. A glob of chewing gum. It has attached itself and has seemed to have taken up permanent residence underfoot.
Getting a bit of gum on the bottom of our shoe may be a common occurrence and yes, it is a little gross as well, considering it spent many minutes in someone’s bacteria-ridden mouth. Hey, we all have bacteria!
But the procedure for removal is easy, as you grab something to scrape it off and no doubt just go about your business, with the friction of the show hitting the ground eventually removing the residue.
However, when gum gets into clothing or other fabric, that’s a different challenge.
Removing gum when it is warm or room temperature is very challenging. Without special solvents that the professionals use, you might just make a mess of the chore. So you make the best of what you have. And that’s something cold.
With gum in carpet or an area rug, use an ice cube in a small, zip-lock bag. Rub the ice cube on the gum until it starts to harden and when it seems hard enough, break the gum off the fibers. Just don’t force the issue as you could physically damage the fibers. If you are successful in removing most the gum, you now need to deal with the residue. A very small amount of dry solvent, such as rubbing alcohol, on a white cloth can help remove the residues. Contact your favorite carpet cleaner for complete advice and to avoid damage.
For clothing or garments, you can be a little more aggressive. Put the affected item in a bag and stick it in the freezer for several hours until completely frozen. Immediately after removing the item from the freezer, break off the gum. Any remaining residue can be removed with typical laundry pre-treatment products and then, of course, put the item in the washing machine. Upon removal, before drying, make sure there is no remaining sticky residue. If there is, use a dry solvent on the spot and wash again.
Sounds like a lot of work? It is. That’s why when you need anything cleaned, it pays to call a pro!
Breathe Easy with Better Indoor Air Quality. 3 days Dry of Lake Worth, FL.
As you start reading this, do a quick exercise. Breathe in, really deep… go ahead, fill your lungs.
Feels good, right?
Taking a deep breath of air, especially outdoors after a thunderstorm or when the air is crisp and clean, smells and feels good. It’s refreshing.
But taking a deep breath of air inside, such as in a home or commercial building, can be a different matter altogether.
The air you breathe, you innocently assume, is clean and healthy. That may not always be the case, as reports of poor indoor air quality (IAQ) prove that not every indoor environment can be considered healthy.
When indoor air quality is poor, there can be issues for many people, especially those who suffer from allergies, asthma, respiratory illnesses, among others. The list can be quite extensive.
Poor indoor air quality doesn’t mean just “stuffy” air, the type that can build up in a home that doesn’t have sufficient air exchanges during the day. Although that can contribute to poor health for some individuals, what really causes health concerns is excessive dust, pet dander, pollen, mold, and other pollutants. While these pollutants are often indoors, they can also be outdoors, and you must recognize the affect they have on your health. For instance, you may decide to stay indoors when you hear of an outdoor poor air quality report on the news.
What you can control, though, at least to some degree, is the indoor air quality in your home.
What can you do? It’s simple. Keep things clean. Change your furnace and air conditioning filter on a regular basis, according to the manufacturer. Use a quality vacuum for your carpet and furniture and use it weekly, and more often if you have a busy household. Those hard floors? They need cleaned as well, as dust can easily build up and become airborne from those surfaces. When you dust surfaces, such as shelves or countertops, use a soft cloth that will hold the dust instead of pushing it off onto the floor.
And, of course, have your carpet and furniture cleaned based on the recommendation of your favorite cleaning company. In fact, isn’t it time you had your carpet and furniture cleaned… right now?
Do the best thing, make the call today. After all, it pays to call a pro!
Clean It — Don’t Cover It. 3 days Dry of Lake Worth, FL.
Odors. They are everywhere. When pleasant, we might call them “scents.” When not-so-pleasant, we might call them malodors.
Odors are caused by a variety of sources. Some odors are pleasant, welcoming, such as from a fresh-cut batch of flowers or a nice, home-cooked meal. Others are not pleasant, “malodorous,” such as from an unattended cat litter box or rotting garbage left too long in a trash bin.
And when something is malodorous, you must do something about it. Sometimes, the urge is to just cover it up. That can be a very bad idea as odors just keep getting worse and worse and you eventually have a difficult situation to deal with.
You want your home to be neat, clean, and odor-free, except for odors (scents) that you introduce because they are pleasant and welcoming, such as air fresheners, perfumes, scented candles, etc. A rule of thumb is this: When it is clean and dry, there should be no odors.
Your carpet, furniture and other absorbent materials in your home, over time, become soiled and often collect odors. Normal “dusty” odors are part of life between cleaning, and routine chores keep them manageable. Yet odors from urine, feces, body perspiration, and other sources are offensive and must be removed.
There are three principles to follow when it comes to keeping your home clean and odor-free.
Remove the source
When something is deposited, spilled, or has come into contact with a surface, the first step is to remove contamination. This means scraping, rinsing or otherwise removing any odor-causing sources. The sooner you do this, the easier the job will be. An example would be blotting and removing a fresh pet “accident”, as odors will quickly become worse over time.
Clean affected areas
Once the source is removed, there is still some contamination on the surface. A thorough cleaning is important to remove any residual matter that can cause odors. Using hot water is best, if the surface can handle higher temperatures. Some furniture fabrics are heat sensitive, for example.
Deodorize and disinfect
Now it’s time to use odor-removing products, such as an approved deodorizer and/or disinfectant. This should be the final step in odor removal. Follow manufacturer directions exactly, as using too little or too much product can be counter-productive.
And never forget, your favorite cleaning professionals know how to clean and tackle tough odors. Let them do the dirty work. It pays to call a pro!
Service Area Includes: